| 1 |
B.V.R. Sai Krishna and Manas Kumar Pal, “Droplet impact dynamics of spray coated
superhydrophobic metal surfaces at various inclinations”, Experimental Thermal and Fluid
Science, 174 (2026) 111697, [Impact Factor 3.4]. |
| 2 |
E. Rama Krishna Reddy and Manas Kumar Pal “Influence of hydrogen induction in a CRDI
engine fuelled with water emulsified waste plastic oil blend”, International Journal of Hydrogen
Energy , 49(C) :1282-1293 (2024) [Impact Factor 8.3]. |
| 3 |
Manas Kumar Pal and E. Ramakrishna Reddy, “Application of diesel-RK simulation tool for
reducing NOx emission from biodiesel blend fuels at retarded injection condition”, International
Journal of Energy for a Clean Environment, 25(1):83–95 (2024). |
| 4 |
Manas Kumar Pal and Aneesh Bhagwat, “Modification of a multi-hole Injector to a single-hole
injector and spray characteristics of the modified injector by two different Imaging techniques”,
Journal of Flow Visualization & Image Processing, 30(4):117–135 (2023) [Impact Factor 1.0]. |
| 5 |
Manas Kumar Pal, “Study on the effect of the presence of fuel vapour in the surrounding gas on the
mixing controlled vaporization of fuel spray”, Atomization and Sprays, 33(2):49–67 (2023),
[Impact Factor 1.8]. |
| 6 |
Manas Kumar Pal, “Liquid and vapor phase behavior of High-pressure n-hexane spray”, Journal
of Flow Visualization & Image Processing, 28(1): (2021), 21–44. [Impact Factor 1.0]. |
| 7 |
Manas Kumar Pal, “Effect of ambient fuel vapour concentration on the liquid length and air-fuel
mixing of an evaporating spray”, Fuel, 256 (2019) 115945, [Impact Factor 7.5]. |
| 8 |
Manas Kumar Pal and Shamit Bakshi, “Effect of ambient fuel vapour concentration on the vapour
penetration of evaporating n-hexane sprays”, Fuel, 223 (2018) 179-187, [Impact Factor 7.5]. |
| 9 |
Manas Kumar Pal and Shamit Bakshi, “Study of the effect of ambient vapour concentration on the
spray structure of an evaporating n-hexane spray”, Experimental Thermal and Fluid Science, 88
(2017) 566–575, [Impact Factor 3.4]. |
| 10 |
K. Hima Teja and Manas Kumar Pal, “ A Numerical Study on Droplet Evaporation using Mass
and Heat Transfer Approach” , Journal of Mines, Metals and Fuels, 71(9): 1302-1309; (2023). |
| 11 |
Manas Kumar Pal, D. Gnaneswar, L. Harish, M. Vishnu Chaitanya, and C. Aravind Reddy, “
Development and Study of a Low-Cost Mass Flow Characterization Technique for Port Fuel
Injector”, Advances in Mechanical Engineering and Material Science, Lecture Notes in
Mechanical Engineering ( 2023). |
| 12 |
Kakumani Chakradhar and Manas Kumar Pal, “Design and analysis of constant volume optical
chamber for spray and combustion characterization” Materials Today: Proceedings 56 (2022)
1418–1423. |
| 13 |
Karthik, J., Pal M.K., “Design and Analysis of Car Brake Rotor and Brake Caliper for Efficient
Braking”, Advances in Mechanical Engineering and Material Science, Lecture Notes in
Mechanical Engineering (2022). |
| 14 |
Manas Kumar Pal and Shamit Bakshi, “Study of the Effect of Ambient Vapour Concentration on the
Spray Structure in Constant Volume Spray Test Rig” ILASS – Europe 2016, 27th Annual
Conference on Liquid Atomization and Spray Systems, 4-7 September 2016, Brighton, UK. |
| 15 |
Manas Kumar Pal and Shamit Bakshi, “Liquid Phase Penetration of n-Hexane Sprays at different
Vapour Concentration of the Ambient”, ILASS-Asia 2016, 18th Annual Conference on Liquid
Atomization and Spray Systems - Asia, 6-9 November 2016, Chennai, India. |
| 16 |
Manas Kumar Pal, Aneesh Bhagwat, Anand T N C, Shamit Bakshi, “Comparison of a singleplume
spray with a multi-plume-spray from a multi-hole common-rail direct injector”, ICLASS
2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, August 23-
27, 2015, Tainan, Taiwan |
| 17 |
Manas Kumar Pal, Aneesh Bhagwat, Ghodke Pundlik , R. Velusamy, D. Siva Krishna Reddy,
Anand T N C, Shamit Bakshi, “Spray visualization of high-pressure diesel sprays at various
ambient conditions”, 2nd National Propulsion Conference (NPC-2015) – IIT Bombay, India. |
